Operator`s manual

76 OBD
STRIP CHART MODE
Press ^ to select the <STRIP CHART> setup from any Data List display. The <STRIP
CHART> allows you to select five parameters to be printed. The Strip Chart mode only
works with the optional VP-411/414 printer. Press P* to start the Strip Chart
printing. Live data is printed until it is turned off with P( or when you exit Data List.
ACTIVE KEYS
ud Move the cursor (highlight) up and down.
y Change the highlighted parameter to the next parameter in the list.
n Change the highlighted parameter to the previous parameter in the list.
AY Change to the next parameter not currently displayed.
AN Change to the previous parameter not currently displayed.
! Go to <DATA LIST> mode.
@ Go to <LED/LIST> mode.
# Go to <BAR GRAPH> mode.
$ Go to <LINE GRAPH> mode.
% Go to <CUSTOM LIST> mode.
( Change between large and compressed character size.
) Turn cursor on and off.
P* Start Strip Chart.
P( Stop Strip Chart.
Ah Display parameter information.
s Print data list.
NOTE
This function requires the optional VP-411/414 printer.
SAMPLE OF STRIP CHART PRINTOUT