Operator`s manual

40 TESTER
DATABASE SELECT
Press 6 from the SETUP MENU to select the Vehicle Database. Use the arrow keys to
select the Database.
ACTIVE KEYS
ud Moves the cursor (highlight) up and down to select a database.
e Selects the highlighted menu item.
APPLICATION SELECT MENU ENABLE / DISABLE
Press 7 from the SETUP MENU to select APP SELECT MENU ENABLE / DISABLE.
To skip the APPLICATION SELECT menu at Power-up and go straight to the Diagnostic
Application, select DIAGNOSTIC ONLY. To display the APPLICATION SELECT
MENU at Power-up, select DIAG AND CUSTOM. See Getting Started on page 32.
ACTIVE KEYS
1 Selects DIAGNOSTIC ONLY to disable the Application Select Menu.
2 Selects DIAG AND CUSTOM to display the Application Select Menu at
Power-up.
ud Moves the cursor (highlight) up or down to select an option.
e Selects the highlighted menu item.
NOTE
You must exit to the POWER-UP DISPLAY for the function to
work properly.
NOTE
You must exit to the Power-up Display for the function to work
properly.