Operator`s manual

GAS ANALYZER 337
Strip Chart Mode
Press ^ to select the <STRIP CHART> setup from any Data List display. The <STRIP
CHART> setup allows you to select up to five parameters to be printed. The <STRIP
CHART> mode only works with the optional VP-411 printer. Press P* to start
<STRIP CHART> printing. Live data will be printed until it is turned off with P( or
the Data List is exited.
ACTIVE KEYS
u d Move the cursor (highlight) up and down.
y Change the highlighted parameter to the next parameter in the list.
n Change the highlighted parameter to the previous parameter in the list.
Ay Change to the next parameter not currently displayed.
An Change to the previous parameter not currently displayed.
! Go to <DATA LIST> mode.
@ Go to <LED/LIST> mode.
# Go to <BAR GRAPH> mode.
$ Go to <LINE GRAPH> mode.
( Change between large and compressed character size.
) Turn cursor on and off.
P* Start Strip Chart.
P( Stop Strip Chart.
Ah Display parameter information.
s Print data list.