Operator`s manual

336 GAS ANALYZER
Bar Graph Mode
Press # to select the <BAR GRAPH> mode from any Data List display. <BAR
GRAPH> shows relationships among up to five different data parameters (or six
parameters using compressed characters). The displayed data parameters can be selected
with the active keys.
ACTIVE KEYS
u d Move the cursor (highlight) up and down.
y Change the highlighted parameter to the next parameter in the list.
n Change the highlighted parameter to the previous parameter in the list.
Ay Change to the next parameter not currently displayed.
An Change to the previous parameter not currently displayed.
! Go to <DATA LIST> mode.
@ Go to <LED/LIST> mode.
$ Go to <LINE GRAPH> mode.
^ Setup <STRIP CHART> mode.
( Change between large and compressed character size.
) Turn cursor on and off.
P* Start Strip Chart.
P( Stop Strip Chart.
Ah Display parameter information.
s Print data list.
Line Graph Mode
Press $ to select the <LINE GRAPH> mode from any Data List display. <LINE
GRAPH> displays two data parameters on the moving line graph. The displayed data
parameters can be selected with the active keys.
ACTIVE KEYS
l r Change <LINE GRAPH> time scale. Allowable scales are 60, 100, 240,
300, and 600 seconds.
u d Move the cursor (highlight) up and down.
y Change the highlighted parameter to the next parameter in the list.
n Change the highlighted parameter to the previous parameter in the list.
! Go to <DATA LIST> mode.
@ Go to <LED/LIST> mode.
# Go to <BAR GRAPH> mode.
^ Setup <STRIP CHART> mode.
( Change between large and compressed character size.
) Turn cursor on and off.
P* Start Strip Chart.
P( Stop Strip Chart.
Ah Display parameter information.
s Print data list.