Operator`s manual

280 OBD II
LINE GRAPH MODE
Press $ to select the <LINE GRAPH> mode from any Data List display. The <LINE
GRAPH> displays two data parameters on the moving line graph. The displayed data
parameters can be selected with the Active Keys.
ACTIVE KEYS
l r Change Line Graph time scale. Allowable scales are 5, 10, 15, 30, 60, 100,
200, and 300 seconds.
u d Move the cursor (highlight) up and down.
y Change the highlighted parameter to the next parameter in the list.
n Change the highlighted parameter to the previous parameter in the list.
! Go to <DATA LIST> mode.
@ Go to <LED/LIST> mode.
# Go to <BAR GRAPH> mode.
% Go to <CUSTOM LIST> mode.
^ Setup <STRIP CHART> mode.
( Change between large and compressed character size.
) Turn cursor on and off.
P* Start Strip Chart.
P( Stop Strip Chart.
AeChange ECU.
Ah Display parameter information.
e Freeze display.
s Print data list.