Operator`s manual

260 OBD II
ACTIVE TEST DATA LIST
The parameters associated with the active test are displayed in a Data List format. All of
the <DATA LIST> modes are available. Use the l and r keys to change the active
parameter displayed on the bottom line. In <LINE GRAPH> mode, the time scale is fixed
at 30 seconds.
ACTIVE KEYS
l r Change Active parameter value.
u d Move the display up or down one parameter.
Au Move the display one page. (<DATA LIST> mode only.)
Ad
y Change the highlighted parameter to the next parameter in the list. (<LED/
LIST>, <BAR GRAPH>, <LINE GRAPH>, and <CUSTOM LIST> modes
only.)
n Change the highlighted parameter to the previous parameter in the list.
(<LED/LIST>, <BAR GRAPH>, <LINE GRAPH>, and <CUSTOM LIST>
modes only.)
! Go to <DATA LIST> mode.
@ Go to <LED/LIST> mode.
# Go to <BAR GRAPH> mode.
$ Go to <LINE GRAPH> mode.
% Go to <CUSTOM LIST> mode.
( Change between large and compressed character size.
) Turn cursor on and off.
Ah Display parameter information.
s Print data list.
x Return to <TEST DATA> menu.