Operator`s manual

OBD 113
DATA LIST
Press 1 to select the <DATA LIST> mode from the <FUEL CONSUMPTION SETUP>
menu. The Data List displays all of the fuel consumption parameters.
There are three different modes of display for the Fuel Consumption Data List: <DATA
LIST>, <BAR GRAPH>, and <LINE GRAPH>.
BAR GRAPH MODE
Press # to select the <BAR GRAPH> mode from any Data List display.
ACTIVE KEYS
u d Move the cursor (highlight) up and down.
y Change the highlighted parameter to the next parameter in the list.
n Change the highlighted parameter to the previous parameter in the list.
AY Change to the next parameter not currently displayed.
AN Change to the previous parameter not currently displayed.
! Go to <DATA LIST> mode.
$ Go to <LINE GRAPH> mode.
( Change between large and compressed character size.
) Turn cursor on and off.
Ae Reset the short and long term averaging for fuel consumption calculations.
A! Change the units of the displayed parameters (MPG, LTR/100 km, km/LTR,
MPIG).
Ar Change between long and short term displays.
Al Change between long and short term displays.
s Print data list.
As Print screen.