Operator`s manual

100 OBD
DATA LIST
Press 2 to select the <DATA LIST> from the <ENGINE MENU>. The Data List
displays all data parameters supplied by the ECU.
There are five different modes of display for the DATA LIST: <DATA LIST>, <LED/
LIST>, <BAR GRAPH>, <LINE GRAPH>, and <STRIP CHART>. The display mode
can be changed by pressing ! - ^.
DATA LIST MODE
Press ! to select <DATA LIST> mode from any Data List display.
Twelve parameters using large characters or 16 parameters using compressed characters
can be displayed at one time. All parameters can be viewed by pressing the up or down
keys.
ACTIVE KEYS
u d Move the display one parameter.
A u Move the display one page.
A d
@ Go to <LED/LIST> mode.
# Go to <BAR GRAPH> mode.
$ Go to <LINE GRAPH> mode.
^ Setup <STRIP CHART> mode.
( Change between large and compressed character size.
) Turn cursor on and off.
P* Start Strip Chart.
P( Stop Strip Chart.
Ah Display parameter information.
s Print data list.