User guide

1640 Icon LCD Keypad 11
3.8 Manual Bypass Programming
Manual Bypass Programming allows you to program the
alarm system to ignore (deactivate) specified zones the next
time the system is armed. For example, you may wish to
bypass certain zones when workers are renovating part of
your establishment. Once the system is disarmed, the bypass
entries are erased.
Can also be activated by using One-Touch Bypass
Programming (see page 13).
3.8.1 Bypass Recall Feature
After disarming the system, the bypass entries are erased.
The Bypass Recall Feature reinstates the previous bypass
How Do I Bypass Zones?
1. Press the key.
2. Enter your [
ACCESS CODE]. The icon flashes.
3. If required, select the area whose zones you wish to
bypass by pressing the [1] or [2] key.
4. Enter the desired two-digit zone number (i.e. zone 3 =
03) or use the [s] or [t] buttons to scroll to the desired
zone and press the key. Repeat to unbypass the
zone. If the zone number illuminates, the zone is
bypassed. If the zone number is extinguished, the zone
is unbypassed.
5. Repeat step 4 until all desired zones are bypassed.
6. Press the key to exit. The icon will illuminate.
1640-EU03.fm Page 11 Thursday, October 5, 2006 3:50 PM