Operating instructions

-96-

Barcode unit precautions for use
(1) When applying barcode stickers, etc. on a sheet, make sure that sheet thickness
with stickers is 0.25mm or less.
(2) When applying barcode stickers, etc. on a sheet, avoid the grayed area below.
(3) Make barcodes according to the following specifi cations and guidelines.
• AIM USS (Automatic Identifi cation Manufacturers barcode symbol specifi cations)
• JIS
JIS X 0501 Barcode symbols for common product codes
JIS X 0502 Barcode symbols for logistic product codes
JIS X 0503 Barcode symbol NW-7 and code 39 basic specifi cations
(4) Faded, chipped, and bleeding barcodes cannot be read. Please note that
barcodes printed with low-resolution printers such as dot-matrix printers and
inkjet printers tend to have similar results.
(5) If the sensor area becomes dirty with paper powder, use a soft cloth, a cotton
swab, or similar materials soaked with plastic cleaner, or use a cloth for glasses to
wipe it.
65mm
Sheet feeding direction
Timing mark side
Barcode unit / V • barcode unit / H

Barcode unit precautions for use
SR-3565(E).indd 96SR-3565(E).indd 96 2007-8-16 10:21:112007-8-16 10:21:11