Operating instructions

-92-

Barcode readable area
The barcode readable area differs depending on the kind of barcode unit.
1.
Barcode unit / V (vertical feeding)
0mm 50mm
Timing mark side
200mm
0mm
10mm
15mm or more
65mm or more (when stacker unit is not installed)
10mm or more (when stacker unit is installed)
Sheet feeding direction
Center
of barcode
Center
of barcode
Clear area
Clear areaClear area
Reading area
Barcode interval
Height of barcode
10mm or more
Narrow bar width 0.19mm or more: height 60mm or less
Narrow bar width 0.19mm or less: height 40mm or less
Clear area
Reading width 80mm
Center
of barcode
Note)
Adjust the barcode center when
reading a number of sheets
.In addition when it makes the
barcode adjoin which is not read,
do not make it go into reading
area.
Barcode unit / V • barcode unit / H

Barcode readable area
SR-3565(E).indd 92SR-3565(E).indd 92 2007-8-16 10:21:072007-8-16 10:21:07