Operating instructions

-87-

Printing position adjustment
1.
Turn the power off and remove the power cord from the outlet.
2.
Remove the carrier cover.
Carrier cover
3.
Loosen the cartridge case fi xing screw, move the cartridge case according to the
desired printing position, and tighten the screw to secure it.
* The scale on the positioning sticker indicates the printing position from the edge
of the paper. The printing position is determined by aligning the cartridge case
fi xing screw with the scale on the sticker.
Fixing screw
Cartridge case
Positioning sticker
4.
Connect the power cord and turn the power on.
5.
Set printer control valied (
See
P.53).
Options Printrer unit

Printing position adjustment
SR-3565(E).indd 87SR-3565(E).indd 87 2007-8-16 10:21:032007-8-16 10:21:03