Operating instructions
-84-
Printrer unit
Printrer unit is a optional equipment with SR-3500.
Printer unit specifi cations
Printing location Prints on top surface of fed sheet
Printing method Inkjet
Number of
characters printed Maximum 72 characters
Kinds of
characters printed Alphabet (uppercase and lowercase letters)
Numbers (0 - 9)
36 Symbols
Japanese kana (including half and full accents,
)
Character size Height approximately 3mm x width approximately 3.2mm - 6.4mm
Character interval Approximately 0.8mm - 92mm
Printing pixels 12 vertical x 9 horizontal pixels
Printing position
2mm or more from standard paper feeding edge to beginning of characters
2mm or more from right edge of maximum size sheet to beginning of characters
Printing position adjustment
Main scanning direction: Adjust head position manually.
Sub scanning direction: Set print starting position command.
Sub scaning direction
Feeding direction
ABCDEF
Main scanning direction
Options Printrer unit
Printrer unit specifi cations
Ink cartridge Expires: 6 months after opening
Life: about 1 million characters
1
Pritable area
Please note the printable area differs depending on the printing
method.
The printable area is indicated in
of the following figure
depending on the size of the sheet used.
2
Note)
If a sheet is curled, it may cause a paper
jam, so please do not use curly sheet.
W
L
Sheet size
Timing mark side
Sheet feeding direction
SR-3565(E).indd 84SR-3565(E).indd 84 2007-8-16 10:21:002007-8-16 10:21:00