Operating instructions
-74-
Options
Stacker unit
SR-6500 is equipped with the stacker unit standardly, SR-3500 is equipped with it optionally.
Stacker unit specifi cations
(printer)
Printing location Prints on top surface of fed sheet
Printing method Inkjet
Number of
characters printed Maximum 72 characters (for A4-size paper)
Kinds of
characters printed Alphabet (uppercase and lowercase letters)
Numbers (0 - 9)
36 Symbols
1
Japanese kana (including half and full accents,
)
Character size Height approximately 3mm x width approximately 3.2mm - 6.4mm
Character interval Approximately 0.8mm - 92mm
Printing pixels 12 vertical x 9 horizontal pixels
Printing position
2mm or more from standard paper feeding edge to beginning of characters (not extened to timing mark)
2mm or more from right edge of maximum size sheet to beginning of characters
Printing position adjustment
Main scanning direction: Adjust head position manually.
Sub scanning direction: Set print starting position command.
Sub scaning direction
Feeding direction
ABCDEF
Main scanning direction
Ink cartridge Expires: 6 months after opening
Life: about 1 million characters
2
W
L
Sheet size
Timing mark side
Sheet feeding direction
2mm (W-4) mm
(L-6) mm
3mm
3mm
2mm
Sheet feeding direction
Timing mark side
The printable area
3
1:
in printing letter kind is printed becoming
2:The number of letters until it stops being printed depend on working condition.
3:The size of printable area depends on the size of the sheet used.
Note)
If a sheet is curled, it may cause a paper jam, so please do not use curly sheet.
Options Stacker unit
Stacker unit specifi cations
SR-3565(E).indd 74SR-3565(E).indd 74 2007-8-16 10:20:482007-8-16 10:20:48