Operating instructions

-61-
Barcode settings
(
when barcode unit is installed
)
You can set the barcode control in SR-3500,SR-6500 mode.

Barcode control
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Go Out Direction] setting,
and press the
FEED/ENTER
switch.
(“

” mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
Use the
UP
and
DOWN
switches to set the value.
5.
Press the
FEED/ENTER
switch to save the setting value into memory.
(The fl ashing “

” mark disappears from the LCD.)
6.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Barcode control
setting values
• Valid • Invalid
Barcode settings

Barcode control
SR-3565(E).indd 61SR-3565(E).indd 61 2007-8-16 10:20:172007-8-16 10:20:17