Operating instructions

-59-
3.
Character interval setting
The space between printed characters can be increased between 0 to 99
pixels. The actual character interval (in mm units) is determined by the “size,”
“magnifi cation,” and “interval” settings.
Character interval (b) = character interval increment x (magnifi cation + interval + 1)
(1) Press the
MENU
switch to enter the menu mode.
(2) Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
(3) Use the
UP
and
DOWN
switches to select [Character Pitch] setting,
and press the
FEED/ENTER
switch.
(“

” mark fl ashes in the fi rst column of the fi rst line on the LCD.)
(4) Use the
UP
and
DOWN
switches to set the value.
(5) Press the
FEED/ENTER
switch to save the setting value into memory.
(The fl ashing “

” mark disappears from the LCD.)
(6) Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
No. Size character interval increment
1 3.2mm 0.4mm
2 4.0mm 0.5mm
3 4.8mm 0.6mm
4 5.6mm 0.7mm
5 6.4mm 0.8mm
b
Character pitch
setting values
0 - 99 (Dots)
Printer settings

SR-600,SR-9000 mode
SR-3565(E).indd 59SR-3565(E).indd 59 2007-8-16 10:20:142007-8-16 10:20:14