Operating instructions

-58-
Printer settings

SR-600,SR-9000 mode
2.
Character magnifi cation setting
Width can be magnifi ed between 1 to 15 times.
Character width = size x magnifi cation
(1) Press the
MENU
switch to enter the menu mode.
(2) Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
(3) Use the
UP
and
DOWN
switches to select [Magnifi cation] setting,
and press the
FEED/ENTER
switch.
(“

” mark fl ashes in the fi rst column of the fi rst line on the LCD.)
(4) Use the
UP
and
DOWN
switches to set the value.
(5) Press the
FEED/ENTER
switch to save the setting value into memory.
(The fl ashing “

” mark disappears from the LCD.)
(6) Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
[Setting example 1]
When the size is set at 3.2mm and magnifi cation is 1.
Character width = 3.2 x 1 = 3.2mm
[Setting example 2]
When the size is set at 3.2mm and magnifi cation is 2.
Character width = 3.2 x 2 = 6.4mm
[Setting example 3]
When the size is set at 4.0mm and magnifi cation is 2.
Character width = 4.0 x 2 = 8.0mm
Character magnifi cation
setting values
1 - 15 (Times)
3.2mm
6.4mm
8.0mm
SR-3565(E).indd 58SR-3565(E).indd 58 2007-8-16 10:20:112007-8-16 10:20:11