Operating instructions

-44-

Setting hopper mode
Setting the hopper mode for reading sheets.
The hopper mode can be set to either “ADF” or “manual feed.”
If you set it to “manual feed,” you need to set the sheet insertion waiting time.
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Hopper Mode] setting,
and press the
FEED/ENTER
switch.
(“

” mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
Use the
UP
and
DOWN
switches to set the value.
5.
Press the
FEED/ENTER
switch to save the setting value into memory.
(The fl ashing “

” mark disappears from the LCD.)
6.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Set sheet insertion waiting time when “manual feed” is selected
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
hopper mode
setting values
• ADF
• Manual Feed
Data reading settings

Setting hopper mode
SR-3565(E).indd 44SR-3565(E).indd 44 2007-8-16 10:19:402007-8-16 10:19:40