Operating instructions

-40-
Setting magnifi cation when timing control types are selected
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Magnifi cation] setting,
and press the
FEED/ENTER
switch.
(“

” mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
Use the
UP
and
DOWN
switches to set the value.
Magnifi cation setting values
• Top-end timing
control type
1 - 9 (times)
• Bottom-end timing
control type
2 - 9 (times)
5.
Press the
FEED/ENTER
switch to save the setting value into memory.
(The fl ashing “

” mark disappears from the LCD.)
6.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Data reading settings

Setting reading method
SR-3565(E).indd 40SR-3565(E).indd 40 2007-8-16 10:19:302007-8-16 10:19:30