Operating instructions

ManualsBrandsSekonic ManualsComputer equipmentSR-6500

-39-



Setting reading method

Setting mark-reading method.

There are six kinds of reading methods: “Top-end timing control type,” “Bottom-end timing

control type,” “Direct under type,” “FACOM,” “Mark to mark type (without top-end margin

reading),” and “Mark to mark type (with top-end margin reading).”

When setting to “top-end timing control type” or “bottom-end timing control type,” you need

to set a control multiple number.

1. Press the

switch to enter the menu mode.

2. Use the

and

DOWN

switches to select the following parameters,

and press the

FEED/ENTER

switch.

3. Use the

and

DOWN

switches to select [Reading Method] setting,

and press the

FEED/ENTER

switch.

(“



” mark ﬂ ashes in the ﬁ rst column of the ﬁ rst line on the LCD.)

4. Use the

and

DOWN

switches to set the value.

5. Press the

FEED/ENTER

switch to save the setting value into memory.

(The ﬂ ashing “



” mark disappears from the LCD.)

6. Keep pressing the

CLEAR/EXIT

switch until it returns to normal mode,

or press the

switch to return to normal mode.

Reading method

setting values

• Control Fore

• Control Back

• Direct

• FACOM

• Mark to Mark



Data reading settings



Setting reading method

SR-3565(E).indd 39SR-3565(E).indd 39 2007-8-16 10:19:282007-8-16 10:19:28