Operating instructions

ManualsBrandsSekonic ManualsComputer equipmentSR-6500

-37-

(4) Use the

and

DOWN

switches to set the value.

2-6.

Setting character code

(1) Press the

switch to enter the menu mode.

(2) Use the

and

DOWN

switches to select the following parameters,

and press the

FEED/ENTER

switch.

(5) Press the

FEED/ENTER

switch to save the setting value into memory.

(The ﬂ ashing “



” mark disappears from the LCD.)

(6) Keep pressing the

CLEAR/EXIT

switch until it returns to normal mode,

or press the

switch to return to normal mode.

Flow control

setting values

•

RS/CS

•

Xon/Xoff

• None

(3) Use the

and

DOWN

switches to select [Character Code] setting,

and press the

FEED/ENTER

switch.

(“



” mark ﬂ ashes in the ﬁ rst column of the ﬁ rst line on the LCD.)

(4) Use the

and

DOWN

switches to set the value.

(5) Press the

FEED/ENTER

switch to save the setting value into memory.

(The ﬂ ashing “



” mark disappears from the LCD.)

(6) Keep pressing the

CLEAR/EXIT

switch until it returns to normal mode,

or press the

switch to return to normal mode.

Character code

setting values

• Accept All

• Ignore 4 Codes

If ignore some is

selected, the following

codes are ignored.

• 20H • 0AH

• 7FH • 1AH

Connecting to a computer



RS-232C

SR-3565(E).indd 37SR-3565(E).indd 37 2007-8-16 10:19:212007-8-16 10:19:21