Operating instructions

-112-
(2) Transmission errors
Error Explanation Code Solution
Command error
A non-specifi ed command code
was received.
F4
Press the CLEAR
switch
(or execute the clear error command).
Parameter error
A non-specifi ed parameter was
received.
F5
Press the CLEAR switch
(or execute the clear error command).
Protocol error
While processing a command,
another command was received.
F6
Press the CLEAR switch
(or execute the clear error command).
(3) Cover open errors
Error Explanation Code Solution
Cover open
The cover of the main body unit
is open
G1
Check if the cover of the main
body unit is closed.
Stacker unit cover open
Front door of the stacker unit is
open.
G2
Close the front door of the
stacker unit.
* All data that OMR receives while a transmission error occurs will be invalid.
* When the cover is closed, errors and warnings other than hardware
errors will be cancelled.
(4) Jam errors
[Main body unit]
Error Explanation Code Solution
No feed
Paper is not feeding though
paper-feeding operation has
started.
H1
• Reset paper.
• Press the CLEAR switch
(or execute the clear error
command).
Jam at paper-feeding
detection sensor
A paper jam occurred at the
paper-feeding detection sensor.
H2
• Remove jammed paper.
• Press the CLEAR
switch
(or execute the clear error
command).
Jam at reading start
detection sensor
A paper jam occurred at the
reading start detection sensor.
H3
• Remove jammed paper.
• Press the CLEAR switch
(or execute the clear error
command).
Jam at main body unit
paper discharge
detection sensor
A paper jam occurred at the
main body unit paper discharge
detection sensor.
H4
• Remove jammed paper.
• Press the CLEAR switch
(or execute the clear error
command).
Error displays and countermeasures
SR-3565(E).indd 112SR-3565(E).indd 112 2007-8-16 10:21:252007-8-16 10:21:25