Operating instructions

-108-
Setting menu Setting item Setting value *1 *2
Test Mode
Feed Test 1 Start ,
Stop O O
Feed Test 2 Start ,
Stop O O
Marking Test
(only when the stacker unit and the printer unit
are installed)
Start , Stop O O
Printer jet test
(only when the stacker unit and the printer unit
are installed)
Start O O
*1 Items displayed when SR-3500 mode or SR-6500 mode is selected as the operating mode.
*2 Items displayed when SR-600 mode or SR-9000 mode is selected as the operating mode.
*3 Maximum number of columns to read differs depending on device sensor pitch.
*4 Data in parenthesis will appear according to options installed in the device.
*5 Factory default values differs depending on device sensor pitch.
1/6 inch:Direct under type 0.2,0.25,0.3 inch:Top-end timing control type 0.3F inch:“FACOM” type
indicates factory default values.
List of menu modes
SR-3565(E).indd 108SR-3565(E).indd 108 2007-8-16 10:21:222007-8-16 10:21:22