Product specifications

iv
SR-1800
[Direct under type card (1/6” IBM card size)]
* Cut corners and round corners
They help you to easily check if the sheet is placed in the right direction, and help you to
manage the sheet and keep it orderly.
Cut sheet corners straight or rounded according to the specifications shown below.
Straight cut corners: standard 6mm or less.
Chamfer angle 45°
Round corners: R 6mm
Standard size 187.32
0.2
A
0.2
A
0.2
A
82.55
0.8
6 or more
Minimum 1
5 or more
3.8±0.1
Standard size
General tolerance ±0.2
[Unit: mm]
A
4.23 x 15=63.45
Minimum 1.21
3.5-4.3
4.23
11.43
Cut corner (*)
0.2
A
0.1
Standard size 187.32
0.2
A
0.2
A
0.2
A
82.55
0.8
6 or more
Minimum 1
5 or more
3.8±0.1
Standard size
General tolerance ±0.2
[Unit: mm]
A
4.23 x 15=63.45
Minimum 1.21
3.5-4.3
4.23
11.43
Cut corner (*)
0.2
A
0.1
6mm
45
6mm
6mm
45
6mm
(6mm)
R 6mm
(6mm)
(6mm)
R 6mm
(6mm)