Operating instructions

The procedures for taking measurements when using

a movie camera are the same as for taking ambient

light measurements. Keep depressing the UP side of

UP/DOWN key. Then, after the display of 1/8000 sec.,

cine scales for 8, 16, 18, 24, 32, 64 and 128 fps. will

be displayed, one after another. At the same time, the

symbol C will be indicated on the display (Fig. 15).

5. By pressing F/EV key the F/number display will

be changed to the EV/number display, and vice

versa. In case of EV mode the bar-dot symbols

are not indicated on the display (Fig. 14).

Note: The notes for wireless measurement

are also applicabel to ambient light

measurement.