Datasheet

18
Optional Accessories
Exposure Profile Target II
This 25-patch test target gathers even more information about
a camera’s exposure characteristics. It consists of two sides:
An 18% Gray Card to establish color balance before profiling
and Profile Target made up of central 18% gray patch and 24
surrounding patches arranged in ¹⁄₆th stop values. It offers
faster, more accurate testing because it requires only three
shots: One at L-758’s metered exposure; one at -3EV and
one at +3EV. It is fully compatible with the new Sekonic Data
Transfer Software version. 2.0.
Exposure Profile Target
The more basic of the targets, it consists of 7 patches arranged
in ¹⁄₆th stop decreasing reflectance. The patch set is surrounded
by an 18% reflectance gray field with white and black bars
above and below respectively. Profiling is done by taking eleven
(11) exposures which include a standard exposure metered
from the 18% tone and 5 shots in successive 1EV steps above
and below the metered exposure. It is fully compatible with the
new Sekonic Data Transfer Software version. 2.0.
Step Up Ring /Lens Hood for L-758d r
For attaching filters to the front of the Spot meter lens
(up to 40.5mm filter). Also acts to prevent erroneous light
measurements caused by lens glare.
NP Finder 1°, 5°, 10° for L-358
All-weather designed Non-Parallax 1°, 5°, 10° (angle of
acceptance) spot metering viewfinders offer precise reflected
light measurements of both flash and ambient light.
Gray Card
Convenient, pocket-size gray card target.
Dual Synch Cord
Allows flash measurement and triggering without
reconnection to camera.