Product Manual

3. SYMBOLS AND ABBREVIATIONS

The following symbols and abbreviations are used throughout the Operators Guide:

AC – Alternating Electrical Current

DC – Direct Electrical Current

A – Amperes

V – Electrical Voltage

Alternating Current

Direct Current

Manufacturer

Manufactured For

In Vitro Diagnostic

Electronic equipment marked with this symbol should be disposed in electronic recycling waste.

Biohazard – Potentially infectious materials. Precautions must be observed.

Catalog Number

Lot Number

Consult the Instructions For Use

Consult the instructions for use for important cautionary information such as warnings and precautions

that cannot, for a variety of reasons, be presented on the medical device itself.

Caution: Federal Law restricts to sale by or on the order of a licensed practitioner.

Informational note

Nemko Electrical Safety

I V D

SYMBOLS DEFINITION

4. INTENDED USE

The Silaris Dock is a reusable platform, used in conjunction with a Silaris Test Cassette to run in-vitro diagnostics assays.

5. DOCK DESCRIPTION

The Silaris Dock is an electronic module which executes in vitro diagnostic tests on compatible Silaris Test Cassettes. It consists of an

electro-mechanical interface to a single Test Cassette. The Dock contains all electrical systems, controls and logic necessary to

orchestrate in-vitro diagnostic tests within the inserted Test Cassette.

Upon insertion of a Cassette, the Dock will detect and identify the Cassette type. After the user transfers a clinical test sample into the

Test Cassette and closes the Dock lid, embedded firmware in the Dock will control fluid flow of the sample into the various chambers of

the Test Cassette, apply controlled voltage signals to the various Cassette heaters (monitored by sensors within the Dock), and provide

visual status to the user with critical information such as estimated time to read, and various error states, should they be encountered.