Product Manual

B
C
In
flu
e
n
z
a
D
a
t
e
_
_
_
_
_
_
I
D
_
_
_
_
_
_
_
_
A
B
C
I
n
f
lu
e
n
z
a
D
a
t
e
_
_
_
_
_
_
I
D
_
_
_
_
_
_
_
_
A
Tap
Slowly
3. Remove the cap from the Extraction Reagent bottle.
1. Draw nasal wash or nasopharyngeal aspirate sample to the first (lowest) mark of the graduated transfer pipette.
2. Dispense the entire sample in the transfer pipette into the Extraction Well of the test device.
4. Using a new transfer pipette, draw Extraction Reagent Solution to the first (lowest) mark.
8. Let it stand for 1-2 seconds. Tap the device on a flat surface to ensure that the liquid flows into the hole.
5. Dispense all of the solution in the transfer pipette into the Extraction Well of the test device.
6. Incubate 1 minute. Re-cap the Extraction Reagent bottle. 7. Raise the test device upright (see picture).
10. Start timing. Read test results at 10-15 minutes. Confirm negative results at 15 minutes.
9. Immediately after tapping,
slowly lay the device back down onto the flat surface.
Squeeze here
Sample
Extraction
Reagent
Ultra FLU A&B Test
NASOPHARYNGEAL WASH/ASPIRATE SAMPLE PROCEDURE (PURCHASE OF 1007 REQUIRED)