Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET
NEXT
E
135 134
TM-T90
Specification
(STANDARD)
GS ( L p
L
p
H
m fn [parameters]
GS 8 L p1 p2 p3 p4 m fn [parameters]
[Name] Select graphics data
[Format] ASCII GS ( L pL pH m fn [parameters]
Hex 1D 28 4C pL pH m fn [parameters]
Decimal 29 40 76 pL pH m fn [parameters]
ASCII GS 8 L p1 p2 p3 p4 m fn [parameters]
Hex 1D 38 4C p1 p2 p3 p4 m fn [parameters]
Decimal 29 56 76 p1 p2 p3 p4 m fn [parameters]
* In the description below
GS ( L
is used for explanation.
Note that
GS ( L
and
GS 8 L
have the same function.
If the [parameters] of each format exceeds 65533 bytes use
GS 8 L
.
[Description] Processes graphics data according to the function code fn.
fn Format
Function
No.
Function
0, 48
GS ( L p
L
p
H
m fn
Function
48
Transmits the NV graphics
memory capacity.
2, 50
GS ( L p
L
p
H
m fn
Function
50
Prints the graphics data in the print
buffer.
3, 51
GS ( L p
L
p
H
m fn
Function
51
Transmits the remaining capacity
of the NV graphics memory.
64
GS ( L p
L
p
H
m fn d1 d2
Function
64
Transmits the defined NV graphics
key code list.
65
GS ( L p
L
p
H
m fn d1 d2 d3
Function
65
Deletes all NV graphics data.
66
GS ( L p
L
p
H
m fn kc1 kc2
Function
66
Deletes the specified NV graphics
data.
67
GS ( L p
L
p
H
m fn a kc1 kc2 b x
L
x
H
y
L
y
H
[c d1...dk]1...[c d1...dk]b
Function
67
Defines the raster graphics data in
the non-volatile memory.
69
GS ( L p
L
p
H
m fn kc1 kc2 x y
Function
69
Prints the specified NV graphics
data.
112
GS ( L p
L pH m fn a bx by c xL
x
H yL yH d1...dk
Function
112
Stores the raster graphics data in
the print buffer memory.
p
L
, p
H
specify (p
L
+ p
H
× 256) as the number of bytes after p
H
or p4 (m, fn, and [parameter]).
[Notes] Frequent write command executions by this command may damage the NV memory.
Therefore, it is recommended to write to the NV memory no more than 10 times a day.
While processing this command, the printer is BUSY while writing data to the NV graphics
memory and stops receiving data. Therefore it is prohibited to transmit data, including the
real-time commands, during the execution of this command.