Specifications

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
E
119 118
TM-T90
Specification
(STANDARD)
• When a = 97, the number of parts for head energizing is set to the number specified with (n
L
+ n
H
× 256).
Value of (n
L
+ n
H
× 256)
Number of parts for head energizing
1 One-part energizing
2 Two-part energizing
3 Three-part energizing
4 Four-part energizing
• When a = 116, the paper is selected as the paper specified with (n
L
+ n
H
× 256).
Value of (n
L
+ n
H
× 256)
Paper
1 Specified single-color paper
257 Recommended two-color paper
• When a = 118, the black-color density is selected as the number specified with (n
L
+ n
H
×
256).
(n
L
+ n
H
× 256)
Black-color density
70 Light
85 Medium
100 Dark
•
Adjustment of black-color density:
The black-color density is affected only in two-color printing.
This is not affected for single-color printing.
•
The adjustment function of black-color density is enabled only in the ANK/Multilingual model.
It is disabled in the Japanese model.
• This function code fn
= 5 is enabled only in the user setting mode.
• The values changed with this command become effective with the following:
•
Execution of <Function 2> of this command (recommended)
•
Turning the power on again
•
Hardware reset by the reset signal input through the interface
• The density of printing with four-part energizing on the two-color paper may not be changed.
• To improve the quality of two-color printing, it is recommended to print with two-part
energizing.