Product manual

Version 2.61 Feb. 2008
4
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Make other settings in accordance with the settings described above.
4) Ethernet Port
DIP-SW1 DIP-SW2
No. Setting No. Setting
1 OFF Settable 1 OFF Fixed at OFF
2 OFF Fixed at OFF
3 OFF Fixed at OFF
4 OFF Fixed at OFF
5 OFF Fixed at OFF
6 OFF Fixed at OFF
7 OFF Fixed at OFF
8 OFF Fixed at OFF
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Do not change the current settings of DIP-SW2-1.
Make other settings in accordance with the settings described above.
2.3 Port Information
1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Item Setting range
Baud rate [bps] 2400,4800,9600,19200,38400
*1
,
57600
*1
,115200
*1
Bit length [bit] 8
Parity NONE, ODD, EVEN
Stop bit [bit] 1
Handshake DTR/DSR
Output buffer length [byte] 32 to 1024
Output interval time [ms] 0 to 9999
*1
These Baud rate require setting via Memory Switch.