EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T90) Version 2.61 Feb.
Notes (1) Reproduction of any part of this documentation by any means is prohibited. (2) The contents of this documentation are subject to change without notice. (3) Comments and notification of any mistakes in this documentation are gratefully accepted. (4) This software cannot be used with other equipment that the specified. (5) EPSON will not be responsible for any consequences resulting from the use of any information in this documentation.
Version 2.61 Feb. 2008 Contents SECTION 1. INTRODUCTION ......................................................................................1 SECTION 2. DETAILS ON SETTINGS .........................................................................2 2.1 References of Firmware Versions ..............................................................................2 2.2 Settings of DIP Switches ............................................................................................2 2.3 Port Information.
Version 2.61 Feb. 2008 Section 1. Introduction This manual describes the method of use and related items, as well as machine-specific precautions, when the EPSON TM-T90 Series POS Printers are used with the EPSON OPOS ADK program. This manual applies to the following devices. Device List Serial Parallel USB Ethernet TM-T90 TM-T90M TM-T90P TM-T90PM TM-T90U TM-T90MU TM-T90E TM-T90ME Before reading the manual, see the following explanation about the characteristic of the TM-T90 models.
Version 2.61 Feb. 2008 Section 2. Details on Settings This section describes connection configurations and how to make the settings for the TM-T90 printers. 2.1 References of Firmware Versions Refer to the release notes (Relnote.txt). 2.2 Settings of DIP Switches Confirm that the following settings have been made correctly. 1) Serial port DIP-SW1 No. DIP-SW2 Setting No.
Version 2.61 Feb. 2008 Do not change the current settings of DIP-SW2-1. 2) Parallel Port DIP-SW1 No. DIP-SW2 Setting No. 1 OFF Settable 2 OFF Fixed at OFF 3 OFF Fixed at OFF 4 OFF Fixed at OFF 5 OFF Fixed at OFF 6 OFF Fixed at OFF 7 OFF Fixed at OFF 8 OFF Fixed at OFF 1 Setting OFF Fixed at OFF Set DIP-SW1-1 (Power button function). If this DIP Switch is ON, the power button is disabled. Do not change the current settings of DIP-SW2-1.
Version 2.61 Feb. 2008 Make other settings in accordance with the settings described above. 4) Ethernet Port DIP-SW1 DIP-SW2 No. Setting 1 OFF Settable 2 OFF Fixed at OFF 3 OFF Fixed at OFF 4 OFF Fixed at OFF 5 OFF Fixed at OFF 6 OFF Fixed at OFF 7 OFF Fixed at OFF 8 OFF Fixed at OFF No. Setting 1 OFF Fixed at OFF Set DIP-SW1-1 (Power button function). If this DIP Switch is ON, the power button is disabled. Do not change the current settings of DIP-SW2-1.
Version 2.61 Feb. 2008 The default settings are as shown in the following table. Item Setting range Baud rate [bps] 19200 Bit length [bit] 8 Parity NONE Stop bit [bit] 1 Handshake DTR/DSR Output buffer length [byte] 1024 Output interval time [ms] 2500 2) Port information when using parallel port The port information that can be set with the SetupPOS utility is as follows.
Version 2.61 Feb. 2008 4) Port information when using Ethernet port The port information that can be set with the SetupPOS utility is as follows. Item Setting range Output buffer length [byte] 32 to 1024 Output interval time [ms] 0 to 9999 The default settings are as shown in the following table. Item Setting range Output buffer length [byte] 1024 Output interval time [ms] 2500 2.4 Device Settings The following explanation is about the settings for TM-T90. 2.4.
Version 2.61 Status Log Feb. 2008 ERROR OFFLINE Log file name (include full path) Maximum file size [KB] Default Value *1 *1 Multilingual font Available only for the Multilingual character model. 2.4.2 Paper Type Setting The TM-T90 models support the following paper type. After adding the TM-T90 by the SetupPOS utility, open the “Device Specific Settings” dialog box. In the “Paper” tab the paper type could be selected..
Version 2.61 Feb. 2008 Section 3. Function Details This section describes the functions of the TM-T90 printers in details. Supplementary explanation of the parts not described in detail in the "UPOS" is also given here. 3.1 Property Set Values and Default Values The following explanation is about the property set values and the default values. 3.1.1 Capability Set Values The following values are the Capability set values.
Version 2.61 CapRecMarkFeed CapRecLeft90 CapRecItalic CapRecEmptySensor CapRecDwideDhigh CapRecDwide CapRecDhigh CapRecColor Feb.
Version 2.61 Feb. 2008 3.1.2 List Properties The List Properties are explained in the following. List Property Settings CharacterSetList "255,437,850,852,858,860,863,865,866,998,999, 1252" *1 JrnLineCharsList “” RecLineCharsList “42,56” (When 79.5 mm is set) RecLineCharsList “32,42” (When 59.5 mm is set) RecLineCharsList “30,40” (When 57.
Version 2.61 Feb. 2008 3.1.3 Width and Height Properties The width and height properties are explained in the following. Settings Property Default Maximum Minimum Value value [dot] value [dot] RecLineSpacing 30 127 24 *1 JrnLineSpacing X X X SlpLineSpacing X X X SlpLineHeight [dot] X RecLineHeight [dot] 24,17 JrnLineHeight [dot] X SlpLineWidth [dot] X RecLineWidth [dot] 512 (When 79.5 mm is set) RecLineWidth [dot] 384 (When 59.5 mm is set) RecLineWidth [dot] 360 (When 57.
Version 2.61 Feb. 2008 3.1.4 Common Property Strings The Device information properties are described below. I/F S DeviceName DeviceDescription TM-T90 TM-T90M TM-T90P TM-T90PM TM-T90U TM-T90MU TM-T90E TM-T90ME P U E EPSON TM-T90 POS Printer EPSON TM-T90M POS Printer EPSON TM-T90P POS Printer EPSON TM-T90PM POS Printer EPSON TM-T90U POS Printer EPSON TM-T90MU POS Printer EPSON TM-T90E POS Printer EPSON TM-T90ME POS Printer I/F indicate the connected interface.
Version 2.61 Feb. 2008 3.2 Methods The following explanation is about supported/unsupported Methods, and the detailed information.
Version 2.61 Feb. 2008 3.3 Escape Sequences The following figure is about supported/unsupported Escape Sequences. Escape Sequence Receipt Compatibility with the PageMode printing #P #fP #sP sL #B tL bL #R #lF #uF #rF Maximum [inch] #E #fT bC !bC #uC iC !iC #rC rvC !rvC #sC #fC tbC !tbC tpC !tpC 1C 2C 3C 4C #hC #vC cA rA lA N 0~100 0~100 X X O O O O 0~9999 0~ approx.
Version 2.61 Feb. 2008 Numbers: Settable range *1 When selected paper is Normal Paper, its settable range is 1. *2 Regardless of the PageModeHorizontalPosition property setting, center or right adjust what is to be printed based on the PageModePrintArea property setting in the horizontal direction. 3.4 Printable Barcode Type The TM-T90 models allow the following barcode types.
Version 2.61 Feb. 2008 3.7 Printing Positions The TM-T90 models support the function for setting printing position. Function Receipt Left margin Printing Position O O O: Supported X : Unsupported When the left margin setting function is supported, it is possible to specify the horizontal printing position of the bitmap or barcode by dots unit.
Version 2.61 Feb. 2008 3.9 Printable Bitmap Types and Sizes The TM-T90 models support the following bitmap commands. For the detail, please refer to the Section 3 of “EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)”. The allowance ranges for bitmaps are as follows.
Version 2.61 Feb. 2008 3.11 Maintenance Counter The TM-T90 models feature a maintenance counter function for retaining an operation log of the printer. The following chart shows the available maintenance counters for the TM-T90. Counter number Counter Unit Max.
Version 2.61 Feb. 2008 Section 4. Warnings This section describes precautions in use of TM-T90. • If 2-color thermal paper is selected from the “Device Specific settings” dialog box, 2-color thermal receipt paper must be used in the printer. • When parallel I/F is used with Windows 2000, Windows XP or Windows Vista, please set Busy Condition of Memory SW1-3 to "ON" (Buffer full).