User`s guide

- 6 -
♦ DO NOT use two or more thermal papers which are taped together.
♦ NEVER pull out the thermal paper during the thermal paper setting.
♦ Make sure not to injure your body or other objects by the plate edge.
♦ UNPLUG the DC jack or AC plug from the power outlet if something goes wrong with the printer.
♦ NEVER disassemble the printer without a serviceman.
♦ Be careful not to get your fingers or hands caught in the printer when opening or closing the paper
cover.
♦ In order to ensure the function and the safety of the product, be sure to observe the installation
direction which is determined for each model.
♦ DO NOT connect the RJ connector to a phone line. It should be used as the drawer kick connector.
♦ NEVER connect a USB cable to the RJ connector.
♦ As the plated sheet steel is used in the printer, the edge face might rust.
■ Thermal Paper Handling
♦ Store the thermal paper in a cool, dry, and dark place.
♦ DO NOT rub the thermal paper with hard objects.
♦ DO NOT leave the thermal paper near organic solvents.
♦ DO NOT allow plastic film, erasers, or adhesive tape to touch the thermal paper for long periods.
♦ DO NOT stack the thermal paper with diazo copies immediately after copying or wet-type copies.
♦ DO NOT use chemical glue.
♦ Always use the specified thermal paper. See "16 ACCESSORIES AND CONSUMABLE PARTS",
for details.
■ Precautions on Discarding
When discarding used printers, discard them according to the disposal regulations and rules of each
respective district.
■ Notations
The following two types of notations are used throughout this manual to denote operation precautions
and items to remember:
NOTE
- Operation Precautions
This box contains items that, when not followed, may lead to a malfunction or to a deterioration of
performance.
HINT

Items to Remember
This box contains helpful hints to remember when using the printer.