User`s guide

- 33 -
15 SPECIFICATION
■ Printer Specifications
Item Specification
Model RP-E10, RP-E11
Printing method Thermal
Characters per line
*1
Paper width 80 mm: 24 dots x 12 dots 48 (42
*2
) 16 dots x 8 dots 72 (64
*2
)
Paper width 58 mm: 24 dots x 12 dots 36 (30
*2
) 16 dots x 8 dots 54 (45
*2
)
Character size One-byte: H24 dots x W12 dots, H16 dots x W8 dots
(H x W) Two-byte: H24 dots x W24 dots, H16 dots x W16 dots
Number of effective dots Paper width 80 mm: 576 dots (512 dots
*2
)
Paper width 58 mm: 432 dots (360 dots
*2
)
Dot density 8 dots/mm
Paper width/Printing width 80 mm/72 mm (80 mm/64 mm
*2
)
58 mm/54 mm (58 mm/45 mm
*2
)
Printing speed 350 mm/s max.
Paper cutting method Slide cutting
Paper cutting type Full cut, Partial cut (remaining the center dot)
Operating temperature 5 to 45 °C
Relative humidity
*3
10 to 90 %RH
Dimensions (W x D x H) 129 x 129 x 129 mm
*4
Mass Approx. 1.3 kg (excluding the thermal paper)
Input voltage DC24.0 V ±5%
*1: One-byte character, character spacing is 0 dot
*2: When selecting 512/360 dots by MS4-5
*3: Refer to the technical reference for the allowable humidity range at each temperature
*4: Excluding projections
■ Specified AC Adapter Specifications (Accessories)
Item Specification
Model PW-E2427-W1
Input voltage AC100 to 240 V, 50/60 Hz
Rated output DC24.0 V, 2.71 A
Dimensions (W x D x H) 115 x 35 x 38 mm
*1
Mass Approx. 330 g
*1: Excluding cable