Specifications

9-4
9.1.3 Inserting Recording Paper
(1) Automatic paper insertion
Paper can be inserted automatically with the autocutter unit closed.
See ③ in Section 8.1, LTP1245 LINE THEMAL PRINTER MECHANISM TECHNICAL
REFERENCE.
(2) Manual paper insertion
Open the autocutter unit and insert paper.
See ① in Section 8.1, LTP1245 LINE THERMAL PRINTER MECHANISM TECHNICAL
REFERENCE.
After the printer setup, insert the paper into the paper feed slit in the autocutter, then close the
autocutter unit.
(3) Recording paper removal
With the autocutter unit closed, turn the head up lever to the position shown in Figure 9-4,
release the head and pull the paper out straight.
For information on how to clear paper jams, see Section 9.1.4.
9.1.4 Clearing Paper Jams
If a paper jam occurs, clear it as follows:
1) Turn off the printer and the autocutter.
2) Open the autocutter unit and remove the jammed paper.
For information on paper jams in the autocutter, see CHAPTER 5, "CANCELING MOTOR
(MOVABLE EDGE) LOCK IN THE "ACU6205 AUTOCUTTER UNIT TECHNICAL
REFERENCE".