Specifications

8-3
8.2 HEAD CLEANING PROCEDURE AND PRECAUTIONS
PROCEDURE :
① Lift the head up lever (a) so it stands upright (b).
② Clean the heat elements using alcohol and a cotton swab.
③ After cleaning, set the head up lever to its original position by reversing the steps.
PRECAUTIONS :
① Do not clean the thermal head immediately after printing bacause thermal head will still be hot.
② Cleaning fluid: ethyl alcohol, isopropyl alcohol.
③ Do not use sandpaper, cutter, etc. when cleaning. They will damage the heat elements.
④ Do not start printing operation until alcohol dries.
(a)
(b)
Figure 8-1 Head Cleaning Procedure
HEAD UP LEVER PLATEN ROLLER
HEAT ELEMENT