User`s manual

38
LP-1030-MF User's Manual for Multifunction Printer Operation
Before Use Copy Function
Submission
Function
Preset Functions Scan Function Troubleshooting
1
2
3
4
5
6
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
Selecting the Original Size Standard
Select the size standard applied to the original.
Note

This menu shows only size standards with Available Size Standards set to
On in the System menu. (For more details, see the separate User's Manual
for Basic Printer Operation.)

Make sure this setting matches the original to be loaded.

To load a user dened series original, specify the size at User Dened Size
in the System menu. (For more details, see the separate User's Manual for
Basic Printer Operation.)

With Original Size Setting set to Auto, the Printer automatically identies
the originals of several size standards.
However, the scan operation time is slightly longer, as the Printer prescans
the edge of the original to identify its width.
When you intend to print on the paper of only one size standard, you
are recommended to set Original Size Setting to that size standard. For
example, when you print only on A series paper, you are recommended
to set Original Size Setting to A Series, so that the scan operation time is
reduced.