User`s manual

30
LP-1030-MF User's Manual for Multifunction Printer Operation
Before Use Copy Function
Submission
Function
Preset Functions Scan Function Troubleshooting
1
2
3
4
5
6
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
Copy Function Overview
The copy functions available with the Printer are as follows. The detailed setting
procedures are described from the next page.
Function Description
Original Type Select an image quality type appropriate for the original.
Copy Density Adjust the copy density.
Paper Position
From the paper types installed in the Printer, select the paper
type for copying.
Original Size Specify the size of the original.
Original Size Standard Select the original size standard.
Original Output
Direction
Set the output direction for the original.
Partial Copy Copy an original partially.
Background
Compensation
Delete background colors.
Contrast Adjust the contrast of the original.
Sharpness Adjust the sharpness of the original's contours.
White on Black Reverse Copy an original with its white and black reversed.
Scale Scale the size of the original.
Blank Space Set blank space to the front and rear of the original.
Paper Type
From the paper types installed in the Printer, select the paper
type for copying.
Centering
Copy the image at the center of the paper width.
This function is eective at Synchro Scan with the roll paper
position specied.
Erase Frame Erase the area around the original before copying.
Output Slot Selection Select the output slot for the paper.
Mirror Reverse Perform mirror reverse for the original before copying.
Number of Copies Set the number of copies.
Moderate Scan
Feed the original moderately on scanning to prevent the original
from being damaged.
Original with text &
lines
Adjust the image quality appropriate for the originals with text
and lines.
Blueprint Original Set the image quality appropriate for the blueprint original.
Sort Sort multiple originals before copying.