User`s manual

117
LP-1030-MF User's Manual for Multifunction Printer Operation
Before Use Copy Function
Submission
Function
Preset Functions Scan Function Troubleshooting
1
2
3
4
5
6
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
For more on setting the printing paper series, see Installing Paper with
Other Size Series in Chapter 2 of the separate User's Manual for Basic
Printer Operation.
For more on Installing user dened series paper, see Installing Paper
from a User Dened Standard in Chapter 2 of the separate User's
Manual for Basic Printer Operation.
For the original's setting, specify the size standard of the original you
intend to copy at the copy function's Original Size Standard. (
&
page
38 ).
Q.
With a user dened size original,
- The Printer does not copy the right and left edges of the original; or
- The Printer adds a blank space to the right and left edges to the copy printout.
A.
The user dened size is incorrect.
Refer to Using Paper from a User Dened Series in Chapter 2 of the
separate User's Manual for Basic Printer Operation. Specify a user
dened size appropriate for the original and roll paper you intend to use.
A.
The user dened series original width does not match the user dened
series roll width.
Match the user dened series original width with the user dened series
roll width. The Printer does not copy correctly when the widths are
dierent, for example:
- The original width to 914 mm (35.98 inches); and
- The roll width: to 880 mm (34.65 inches)
Q.
Cannot perform partial copying.
A.
- The distance specied below is longer than the original length.
From: Original's front end
To: Partial copy start position
For partial copying, specify the partial copy start position to be less than
the original length.