User`s manual

113
LP-1030-MF User's Manual for Multifunction Printer Operation
Before Use Copy Function
Submission
Function
Preset Functions Scan Function Troubleshooting
1
2
3
4
5
6
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
Unclear Copying or Scanning
Q.
Black lines appear on scanned image or copy printout.
A.
The shading guide or scanner glass is dirty.
Clean the shading guide and scanner glass (
&
page 26 ).
Caution

Before scanning or copying, remove any dirt from an original. If the original
with dirt, e.g., toner, ink, or dust adherence is scanned or copied, the inside
of the scanner may become dirty.

When an original is long, copy or scan carefully so that it does not touch the
oor.

If you cannot remove a dirt from the original, copy or scan it with a carrier
sheet.
Q.
A fold in the original is copied or scanned in black.
A.
The shadow of the fold was scanned.
Before scanning, atten the fold as at as possible.
Change the loading direction of the original (turn by 90°). Try scanning
again.
Increase the Background Compensation setting (
&
page 42 ).
Q.
An image on the back of the original is scanned or copied.
A.
With a thin original, image on the back side may appear on the front side,
which is scanned or copied.
Increase the Background Compensation setting (
&
page 42 ).