User`s guide

2-18
6 Close the paper roll drawer.
Gently push in the Roll 1 or Roll 2 drawer.
When the paper roll drawer is closed, the following
message appears.
After the replacement, the device will return to the
status before the paper roll was replaced.
Note
Note
(It will take about 30 seconds until paper feeding is ready.)
◆After closing the paper roll drawer, wait until the “Wait a
moment” message disappears before opening the paper roll
drawer again. The device initiates a paper detection just
after the paper roll drawer is closed, so opening the paper
roll drawer during this operation may cause a paper jam.
◆If you change the type of paper roll, you must change the
corresponding settings, referring to “PAPER” menu (⇒ page
7-2).
Wa i t a mome n t