User`s guide

2-12
If an error message about paper supply appears on LCD, paper of larger
size than required (or, if a type of paper is specified, paper of different
type) can be chosen for printing.
e.g.
◆"A1" in the above example indicates the paper roll width and
its indication changes as follows:
Example:
A series: "A0", "A1", "A2", "A3"
9" series: "36"", "24"", "18"", "12""
8.5" series: "34"", "22"", "17"", "11""
30x42 series: "30""
MAP series: "707 mm", "500 mm"
DIN series: "707 mm", "500 mm"
Chinese series: "914 mm", "620 mm", "450 mm",
"310 mm", "297 mm"
◆When a paper type is specified as "Set Paper A0 (TRACE)"
and the paper roll is loaded, the display may be automatically
switched to the paper menu. In such a case, set the type of
the paper roll.
Notes
Press the [Enter] key.
Press the [Enter] key.
* Prints only when paper of larger size than required is available or if
paper of a different type is available.
* Alternative print is disabled, if printing on the manually fed paper.
* When setting the AUTO SUPPLY mode, if a drawer is specified for
paper feed, force print is disabled (in this case, print is always made
on the paper in the specified drawer).
Se t Pape r
Ro l l 1 A3 ( TRACE )
[Enter] to Print
Force Pr int ?
[Enter] to Exec.
Pr int 01/01
Wa i t : 012
F01 HPGL JobNo . 008✽