User`s guide

1-16
5
This button turns on/off the power supply to the device.
6
These LEDs indicate the statues of the device.
● [TONER] LED
Indicates the amount of remaining toner.
On: There is sufficient toner.
Flashing: Toner is running low.
Off: There is no toner (plots cannot be produced without
replacement.)
● [WASTE TONER] LED
Indicates the toner waste bottle status.
On: Normal
Flashing: Replacement time is approaching
Off: Plots cannot be produced without replacement
● [PROCESS] LED
Indicates the process cartridge replacement time.
On: Normal
Flashing: Replacement time is approaching
Off: Process cartridge is not installed.
● [MANUAL FEED] LED
This LED indicates whether the paper to be fed manually has been
loaded.
ON: Paper has been loaded.
OFF: No paper
● [1], [2] LEDs
These LEDs indicate whether the paper has been loaded in the roll 1
and roll 2 drawers, respectively.
ON: Paper has been loaded.
OFF: No paper
● [DATA] LED
This LED indicates the data receiving status.
ON: A job is waiting for the processing.
Flashing: Data is being received.
OFF: No received data
POWER
ERRORDATA
TONER
PROCESS
MANUAL FEED
WASTE
TONER