User`s guide

1-15
Chapter 1 Before using this device
▼The names and functions of each part
REPRINT
MEMORY
RESET
STOP
◆ This device has been set so that the POWER SAVING mode is
selected automatically if no operation is performed for the
specified time. This time can be changed.
● [COPY] key
The COPY mode is selected and the LED on the side of the key turns
on. For details, see the separate volume "User's Guide, Copy Part."
● [DELIVERY] key
The DELIVERY mode is selected and the LED on the side of the key
turns on. For details, see the separate volume "User's Guide, Copy
Part."
● [PRINT] key
The PRINT mode is selected, and printing is enabled.
● [FILE] key
The FILE mode is selected. For details, see the separate volume "User's
Guide, Copy Part."
3
This screen displays a
status of the device.
4
Convenient functions
● [MEMORY] key
Various settings used frequently can be
registered in the memory.
● [REPRINT] key
The print outputted last can be reprinted.
For the reprint, only the number of copies can be set.
● [RESET] key
The settings are reset to initial values.
● [STOP] key
The print can be stopped in the midway.