User`s guide

1-11
Chapter 1 Before using this device
The names and functions of each part
Front
1 Roll 1 drawer (door 1)
2 Roll 2 drawer (door 2)
Install paper roll. (⇒ page 2-11)
3 Manual feed drawer (door 4)
Open this drawer when a paper jam occurs
during manual feeding. (⇒ page 14-3)
4 Finished drawing outlet
Drawings exit from here.
5 Top door (door 6)
Open this door when a paper jam occurs near the
top door. (⇒ page 14-3)
6 Fixation door (door 7)
Open this door when a paper jam occurs in the
vicinity of the finished drawing outlet. (⇒ page
14-3)
7 Manual paper feeding guide (door 8)
Open this door when feeding the paper
manually. (⇒ page 2-34)
8 Manual feed inlet
Insert paper from this inlet during manual
feeding. (⇒ page 2-34)
9 Control panel
The LEDs and LCD which indicate device status
and the keys to set various functions are laid out
here. (⇒ page 1-14)
0 Scanner exit guide
The scanned original is guided up to the exit.
A Waste toner door
Open this door to replace a waste toner bottle.
(⇒ page 2-25)
B Scanner cover
Open this cover when the original is jammed.
This section explains the names, usage information, and functions of each
part of this device.
⑦
⑧
⑨
⑥
⑫
①
④
⑤
⑩
⑪
②
③