User`s guide
Table Of Contents
- Introduction
- TABLE OF CONTENTS
- Chapter 1 Getting started
- Chapter 2 Basic operations
- Plotting procedures overview
- Turning the power on and off
- Installation operations
- Online and offline
- Replacing paper rolls
- Replacing the toner
- Replacing the waste toner bottle
- Replacing the process cartridge
- Manual paper feeding (cut paper)
- Pause, continue, cancel (and additional printing)
- Web function
- Cleaning the exterior
- Using paper of new standard series
- Using paper of Chinese standard series
- Limiting rolls to be used
- Chapter 3 Menu overview
- Chapter 4 Basic Menu Operation
- Chapter 5 "SETUP" Menu
- Chapter 6 "DEVICE" menu
- Chapter 7 "PAPER" menu
- Chapter 8 "FUNCTION" menu
- Chapter 9 "PROTOCOL" menu
- Chapter 10 "RESET" menu
- Chapter 11 "SYSTEM" menu
- Chapter 12 Ethernet parameter "ETHERNET"
- Chapter 13 Terioplot
- Chapter 14 Troubleshooting
- Appendix
Appendix-21
▼ Menu structure
Appendix
#CONNECTION TYPE
>AUTO
#HTTP PORT
>00080
#PORT TIME OUT
>30min
#FTP DATE TYPE
>ASCII/BIN
#SNMP
>OFF
#SNMP VERSION
>V1
#TRAPnn
*AUTO
*FULL
*HALF
*0 to 65535
*OFF
*5min
*10min
*15min
*30min
*ASCII/BIN
*BIN
*OFF
*ON
*V1
*V2
#MANEGER
>000.000.000.000
#ERROR
>ON
#JOB
>OFF
#IP ADDR
>000.000.000.000
#PORT
>ALL
L
*000.000.000.000
to *255.255.255.255
*ON
*OFF
*OFF
*ON (IP ADDRESS)
*ON (PORT)
*000.000.000.000
to *255.255.255.255
*ALL
*PORT01 to 10