User`s guide
Table Of Contents
- Introduction
- TABLE OF CONTENTS
- Chapter 1 Getting started
- Chapter 2 Basic operations
- Plotting procedures overview
- Turning the power on and off
- Installation operations
- Online and offline
- Replacing paper rolls
- Replacing the toner
- Replacing the waste toner bottle
- Replacing the process cartridge
- Manual paper feeding (cut paper)
- Pause, continue, cancel (and additional printing)
- Web function
- Cleaning the exterior
- Using paper of new standard series
- Using paper of Chinese standard series
- Limiting rolls to be used
- Chapter 3 Menu overview
- Chapter 4 Basic Menu Operation
- Chapter 5 "SETUP" Menu
- Chapter 6 "DEVICE" menu
- Chapter 7 "PAPER" menu
- Chapter 8 "FUNCTION" menu
- Chapter 9 "PROTOCOL" menu
- Chapter 10 "RESET" menu
- Chapter 11 "SYSTEM" menu
- Chapter 12 Ethernet parameter "ETHERNET"
- Chapter 13 Terioplot
- Chapter 14 Troubleshooting
- Appendix

14-34
Service Call Errors
Description : This error message may appear if an unrecoverable
hardware or firmware failure occurs in the device.
In this case, you need call a service person to take
measures.
Measure : If the device does not recover from this error after
turning the power off and on, please notify your dealer or
our service center of the displayed error message and
error condition.
■Serial number not set
Description : This error message may appear if the serial number
checked at powering on is not specified.
■Engine error
Description : This error message may appear if the engine of the
device is faulty.
■System error
Description : This error message may appear if an unrecoverable and
exceptional system error occurs in the controller of the
device.
xxxx: Error code
ESETTHES/N
E ENGINE xxxx
Powe r Of f /On
E FFFF-FFFF
POWER OFF /ON