User`s guide

14-31
▼When an error message appears
Chapter 14 Troubleshooting
WCOPY-0B30
Press Any Key
(2) Copy PDL warning (Operator intervention)
If the following warning occurred, the error display and error log
registration are taking place.
By pressing any key, you can remove the warning and recover to normal
condition.
Error code Description Measure
0B30 Long size error
For printing in long size, the setup is limited. Use
default settings for the margin, frameless, move,
mirror, and zoom modes, and scale x1 for the scale
mode.
0B31 to 0B33 Scan parameter error
*
*
Re-scan the original.
If the error recurs, please notify your dealer or
our service center of the displayed error message
and error condition.
If the error code 0B31 or 0B32 appears in the
partial copy, see the separate volume "User's
Guide, Copy Part."