User`s guide

14-25
▼When an error message appears
Chapter 14 Troubleshooting
(4) Delivery interface
xxxx: Error code
W INTERFACE-DL xxxx
Error code Description Measure
1120 TCP is disconnected.
• Check the connection of relay units (HUB,
etc.) between host and this device and the
UTP cable, and retry the delivery.
1131
IP address of the device is
not specified correctly.
• Check that the IP address of the device is
specified correctly.
1133
IP address of the delivery
server (host) is not specified
correctly in the device. Or,
the path control table is not
specified correctly.
•
•
Check that the IP address of the delivery
server (host) is specified correctly.
Check that the path control table is specified
correctly.
1136
TCP connection was reset
from the delivery server.
• There is no problem if the scan data
received by the delivery server is normal,
but if abnormal, retry the delivery.
1139
Delivery server is not
connected to the socket.
•
•
Check that the delivery station (application)
started in the delivery server specified by
this device.
Check the connection of relay units (HUB,
etc.) between host and this device and the
UTP cable, and retry the delivery.
113C
Time out of TCP connection
to the delivery server
• Check the connection of relay units (HUB,
etc.) between host and this device and the
UTP cable, and retry the delivery.
113D
TCP connection was rejected
from the delivery server.
•
•
Check that the delivery station (application)
started in the delivery server specified by
this device.
Check the connection of relay units (HUB,
etc.) between host and this device and the
UTP cable, and retry the delivery.
1141
Invalid IP address is set to
the delivery server, this
device, or path control table.
• Check that the IP address is specified
correctly in respective units and table.
1143 Delivery server down
• Operate the delivery server normally and
retry the delivery.