User`s guide

11-2
Setting items
After this menu is changed, the parameters are automatically saved and
the system is reset. When there is a job standing for processing, you can
only refer to this menu. If you only refer to the menu and do not change
it, the system returns to the offline condition.
Menu First hierarchy item Second hierarchy item Third hierarchy item Parameter
SYSTEM
SYSTEM
#COMM.PARAM
COMM.PARAM
#ETHERNET
Note 1)
COMM.PARAM
#SCANNER
#DELIVELY HOST
ADDRESS
>000.000.000.000
Input value
#DELIVELY PORT
>
Input value
#DELIVELY TIME
OUT (set)
>
Input value
#TWAIN PORT
>30000
0 to 65535
#TWAIN DATA PORT
>32000
0 to 65535
#TWAIN TIME OUT
>30 min
30 min
60 min
90 min
COMM.PARAM
#PARALLEL
TIMING MODE
>NORMAL
NORMAL
FAST
SLOW
#TIME OUT (100 msec)
>300
1 to 18000
COMM.PARAM
#USB
#TIME OUT (sec)
>10
0to99
COMM.PARAM
#PlotDataToFile
#PDTF HostIP Adress
>000.000.000.000
000.000.000.000
to
255.255.255.255
#PDTF PORT
>33000
0 to 65535
#PDTF Timeout (sec)
>05
1to75
COMM.PARAM
#Terioplot
#Terioplot
>OFF
OFF
ON
#Terioplot ADDR
>000.000.000.000
000.000.000.000
to
255.255.255.255
#WEB LOCK
>OFF
--
OFF
ON
SYSTEM
#ENABLE SERIES
Note 2)
Note 1)
Refer to the chapter of Ethernet parameter.
Note 2)
Refer to the "Enable series".
Me nu Mo d e
SYSTEM
#COMM. P ARAM